Pit Lift Parking System, 2 cars in the pit, 1 car on the ground, no sliding-PJS(-2+1)
It is also known as household stereoscopic garage, it is a mechanical parking device that uses the lifting of the carrying plate to realize double increase of parking spaces. This kind of parking equipment structure is simple, compact, PLC or button control, simple and fast operation. According to the driving mode can be divided into motor drive and hydraulic drive. The equipment is suitable for the construction of outdoor square, basement, small villa residence, etc., mostly used in private homes, enterprises and institutions, basement and other scenes.
Working principle
This system is designed with 3 levels, 2 in the pit, 1 on the ground, each column total 3 cars can lift up and down freely. The top car can go directly in and out; the middle car can go in and out when the middle car lift to the ground level; the bottom car can go in and out freely when it lift up to the ground level. It has big pallets covering the top pit area. Total depth of pit will be 4260mm.
The pallet is 150mm higher than the land level, it has a 1500mm slopping way for the car parking, and it has a tight cover with the ground frame against water into the pit. It is designed with water drainage system, maintenance entrance with ladders.
The top car pallet can be planted with grass and flowers to keep a wonderful environmental requirements.
Characteristics
- Two cars can be parked when the bottom pit is 2 meters, and three cars can be parked when the bottom pit is 3.9 meters.
- Equipment operation only up or down, don't need to move transversely, the failure rate is very low.
- Adopt key operation, motor drive chain drive.
- When the vehicle is in and out of the storage, the platform is lowered back into the pit, just like the ground parking, which is in harmony with the environment.
- Drainage pump shall be installed for foundation pit
Main structure
- Steel structure
- Car pallet
- Lifting system
- Drive system
- Electrical system
- Safety guard device
- Hydraulic drive system or motor drive system
Technical Parameters
| Item | Parameters |
| Model | PJS(-2+1) |
| Levels of system | 3 |
| Spaces | Based on requirements |
| Size of car (L*W*H) | 5000*1850*1550mm |
| 5000*1850*2050mm |
| Weight of car | 2000kg |
| Motor power | Lift: 5.5~7.5KW, |
| speed: Lift: 3-6m/min |
| Fall: 5m/min |
| Slide: 0.2kw |
| Drive mode | motor drive |
| Modes of operation | IC card reading / Manual button with keyboard |
| Controller | PLC |
| Warning devices | Sound, light, electricity |
| Malfunction indication | Fault diagnosis by computer, liquid crystal display |
| Frame composition | Columns and beams are made of H type steel, Channel steel, angle steel and square pipes; |
| Parts appearance treatment | Galvanized treatment and high-grade anti-corrosion painting |
| Parking way | Forward in, Back out |
| Electricity | 3 phases 5 wires, 380V, 50HZ |
Other products
Product Tags:
|
|
Underground Pit Elevator Car Parking System Images
|
